- 09 Jun, 2014 3 commits
-
-
Pavel Emelyanov authored
Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
Andrew Vagin <avagin@parallels.com>
-
Pavel Emelyanov authored
We have a set of routines that open /proc/$pid files via proc service descriptor. Teach them to accept non-pids as pids to open /proc/self/* and /proc/* files via the same engine. Signed-f-off-by:
-
Pavel Emelyanov authored
When running test with ns/ prefix zdth.sh does complex preparations. Make it possible to make them and let started process ready for manual investigation. Signed-off-by:
-
- 06 Jun, 2014 5 commits
-
-
Cyrill Gorcunov authored
New vDSO are in stripped format so use dynamic symbols instead of sectioned ones. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Cyrill Gorcunov authored
We're not sharing the code anymore so drop it. Signed-off-by:
-
Pavel Emelyanov authored
This fixes the support for fifo-s in mount namespaces and makes it easier to control the correct open_path() usage in the future. Signed-off-by: -
Pavel Emelyanov authored
Not all filesystems like it. Other than this options in the image just look cleaner. Signed-off-by: -
Pavel Emelyanov authored
I will need to make cgroup test behave slightly differently when it's in and out of ns/ run. To do so it's handy to use the ZDTM_NEWNS variable set by zdtm.sh Signed-off-by:
-
- 04 Jun, 2014 2 commits
-
-
Pavel Emelyanov authored
This patch consists of 3 unsplittable (from my POV) fixes. 1. Remove messy check from dump_one_mountpoint() -- we have validate_mounts to check whether we can dump the tree or not. 2. Other than being in the wron place the mentioned check is wrong. Comparing of the length of the mp->source-s makes no sense -- it should be mp->root, but even this would be wrong... 3. ... instead, we should check for bind mount root path being accessible from the target mount root path, i.e. the bind->root should start with src->root. Signed-off-by:
-
Pavel Emelyanov authored
Signed-off-by:
-
- 02 Jun, 2014 1 commit
-
-
Pavel Emelyanov authored
The memcpy() in devpts_dump() just overwrites part of them. Fix this and move the whole code into sub-routine for future. v2: Fix off-by-one error spotted by Filipe. Signed-off-by:
Filipe Brandenburger <filbranden@google.com>
-
- 27 May, 2014 12 commits
-
-
Cyrill Gorcunov authored
We use config.h in vDSO handling code so arch targets should depend on it. Signed-off-by:
-
Pavel Emelyanov authored
Signed-off-by: -
Pavel Emelyanov authored
On restore find out in which sets tasks live in and move them there. Optimization note -- move tasks into cgroups _before_ fork kids to make them inherit cgroups if required. This saves a lot of time. Accessibility note -- when moving tasks into cgroups don't search for existing host mounts (they may be not available) and don't mount temporary ones (may be impossible due to user namespaces). Instead introduce service fd with a yard of mounts. Signed-off-by: -
Pavel Emelyanov authored
Each task points to a single ID of cgroup-set it lives in. This is done so to save some space in the image, as tasks likely live in the same set of cgroups. Other than this we keep track of what cgroup set we dump the subtree from. If it happens, that root task lives in the same cgroup set as criu does, we don't allow for any other sub-cgroups and make restore (next patch) much simpler and faster. Signed-off-by: -
Pavel Emelyanov authored
Signed-off-by: -
Pavel Emelyanov authored
The exact structure of the image will be revealed in the next patch(es). What is important here, is that cgroup image is somewhat new. It will likely contain arrays of objects of different types, so I introduce the "header" object, that will link these arrays using pb repeated fields. This will help us to avoid many image files for different cgroup objects and will make the amount of write()-s required be 1. Signed-off-by: -
Pavel Emelyanov authored
Signed-off-by: -
Pavel Emelyanov authored
Signed-off-by: -
Cyrill Gorcunov authored
Currently we build vDSO handling code for all archs provided in the source code having some "common" parts inside pie/vdso.c, pie/vdso-stub.c, vdso-stub.c and vdso.c. This were more or less well but in new linux kernels (starting from 3.16 presumably) the vDSO has been significantly reworked so every architecture must have own vDSO handling engine (just like the kernel does). So in this patch we move vDSO code to arch specific and because aarch64 actually doesn't implement proxification yet due to kernel restrictions -- we drops it out. When there will be kernel support we bring it back in proper arch/aarch64 implementation. Signed-off-by:
Alexander Kartashov <alekskartashov@parallels.com> Signed-off-by:
-
Cyrill Gorcunov authored
Guard vDSO code with CONFIG_VDSO, no need to even build it on archs which do not support vDSO handling. Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
We will need it to figure out if architecture needs vDSO handling code to be built. Note currently only x86 is exporting vDSO simply because ARM support is not yet ready. Signed-off-by:
-
- 26 May, 2014 6 commits
-
-
Filipe Brandenburger authored
Signed-off-by:
-
Filipe Brandenburger authored
Signed-off-by:
-
Filipe Brandenburger authored
This is required when linking statically. It is also consistent with the rules for other zdtm tests that link with -lrt. Signed-off-by:
-
Filipe Brandenburger authored
Signed-off-by:
-
Filipe Brandenburger authored
Without the added dependencies, "make criu" will fail when trying to build arch/x86/crtools.d because it can not find include/config.h, the extra dependencies force the "config" rule to be processed before the dependencies of "criu" are evaluated. Signed-off-by:
-
Filipe Brandenburger authored
This is needed for lib/rpc.pb-c.{d,o} to be removed by "make clean". Signed-off-by:
-
- 23 May, 2014 2 commits
-
-
Andrey Vagin authored
vmsplice doesn't work for such VMA-s. This flags is set in a kernel function remap_pfn_range() (remap kernel memory to userspace), which is widely used by device drivers to provide direct access to a device memory. Reported-by:
J F <jgmb45@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
-
Cyrill Gorcunov authored
When there is a bind mount present on same mountpoint where mark is laying the device of both mountpoints is the same so we might end up getting wrong mountpoint. Instead we should used mount id which is unique among all mounpoints. Note it's a fast fix, I need to review fsnotify code more and make sure all corner cases are covered. https://bugzilla.openvz.org/show_bug.cgi?id=2974Reported-by:
-
- 20 May, 2014 1 commit
-
-
Filipe Brandenburger authored
Add extra troubleshooting messages for errors and failures so that the output can help troubleshoot the issue. Make error handling more uniform by using -1 for errors (e.g. opening files, reading from pagemap, etc.) and 1 for failures (data mismatch, pages not COWed when expected to be, etc.) Tested: Ran this test with criu versions known to have problems with COW and with problems to read from pagemap due to the dumpable flag not being preserved. Signed-off-by:
-
- 14 May, 2014 3 commits
-
-
Andrey Vagin authored
The test proces opens master and slave points. The slave point becomes the control terminal for this process. Then the test process forks a second process and the first process closes the master point. So when a master point is closed in a second process, the first one will be killed by SIGHUP. Reported-by:
Victor Konyashkin <vkonyashkin@parallels.com> Signed-off-by:
-
Andrey Vagin authored
test/Makefile knows better how to execute tests. For example it allows to execute tests simultaneously Signed-off-by:
-
Andrey Vagin authored
Signed-off-by:
-
- 13 May, 2014 4 commits
-
-
Filipe Brandenburger authored
Preserve the dumpable flag, which affects whether a core dump will be generated, but also affects the ownership of the virtual files under /proc/$pid after restoring a process. Tested: Restored a process with a criu including this patch and looked at /proc/$pid to confirm that the virtual files were no longer all owned by root:root. zdtm tests pass except for cow01 which seems to be broken. (see https://bugzilla.openvz.org/show_bug.cgi?id=2967 for details.) This patch fixes https://bugzilla.openvz.org/show_bug.cgi?id=2968Signed-off-by:
-
Andrey Vagin authored
We stop searching if vma->start is bigger than a required one. The coursor is set on the last examined vma. When we are searching a parent vma for the next vma, we start examine vma-s starting from coursor->next, so we don't examine the vma, which is pointed by cursor. This patch replaces list_for_each_entry_continue on list_for_each_entry_from. Reported-by:
-
Andrey Vagin authored
A parent vma can be only one. Fixes: 57d25e7c ("mm: fix expression to determine which vma-s can be shared") Reported-by:
-
Andrey Vagin authored
Look at this hunk from 7659c995: - paddr = decode_pointer(vma_premmaped_start(&p->vma)); + paddr = decode_pointer(vma->premmaped_addr); Obviously we want to use p->premmaped_addr instead of vma->premmaped_addr. Fixes: 7659c995 ("vm: don't overwrite vma->shmid for private mappings") Reported-by:
-
- 12 May, 2014 1 commit
-
-
Cyrill Gorcunov authored
Here we test a big number of small VMAs to survive c/r. The main idea is to use a big number of IOVs needed for page transferring. Signed-off-by:
-
