- 08 Sep, 2016 1 commit
-
-
Kir Kolyshkin authored
Apparently when travis checks patches, it compiles code with -Wformat-security (most probably because the distro/gcc it uses has it on by default), but on my system (Fedora 24/gcc 6.1.1) this flag is not on. As a result, code compiles fine for me but travis reports an error. Add -Wformat-security to default CFLAGS. It helps to catch problems like using printf(str) instead of printf("%s", str). Signed-off-by:Kir Kolyshkin <kir@openvz.org> Signed-off-by:
Pavel Emelyanov <xemul@virtuozzo.com>
-
- 07 Sep, 2016 2 commits
-
-
Pavel Emelyanov authored
It turned out that calling log_first_error() is possible w/o calling log_keep_first_err(), so don't bug_on() on it, just return NULL. Reported-by:
Adrian Reber <adrian@lisas.de> Signed-off-by:
Pavel Emelyanov <xemul@virtouzzo.com> Reviewed-by:
-
Laurent Dufour authored
Dmitry: Thanks for the patch, it looks like it was part of commit 1c249d08870b ("x86: add 32-bit sigframe for rt_sigreturn") from criu-dev. When I've prepared the patches set, I've tested patches separately from the set on x86, but hadn't possibility to test them separately on ppc. And for x86 it didn't matter when to call restore_gpregs() before compat patches, so I didn't catch that it does matter for ppc. Signed-off-by:Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by:
Dmitry Safonov <dsafonov@virtuozzo.com> Signed-off-by:
-
- 06 Sep, 2016 37 commits
-
-
Pavel Tikhomirov authored
1. Fix uninitialized use of pr in cr_dedup_one_pagemap and get_page: https://github.com/xemul/criu/issues/178 2. In ud_open, close pr in case of error returned from find_vmas-> collect_uffd_pages as we free lpi with lpi->pr open; so need check in lpi_fini if uffd is >0 before close v2:rebase to new criu-dev Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by:
-
Pavel Emelyanov authored
Signed-off-by: -
Andrei Vagin authored
An atexit hook is executed for forked processes too, clean_tests_root() has to be called only once. v2: fix flak8 warnings Signed-off-by:
Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
-
Pavel Emelyanov authored
Signed-off-by: -
Kir Kolyshkin authored
Make sure travis/jenkins complain if someone sends a patch that results in criu --help output violate standard terminal width requirement. Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Kir Kolyshkin authored
Remove that weird special case from check_add_feature() function, making it a separate pr_check_features(), which prints a SEP-separated list of feature names, obeying the max WIDTH, and prepending each line with OFFSET. That way, we have a decept --help output: --feature FEAT only check a particular feature, one of: mnt_id, mem_dirty_track, aio_remap, timerfd, tun, userns, fdinfo_lock, seccomp_suspend, seccomp_filters, loginuid, cgroupns, autofs Alternatively, we could just drop the functionality of showing all the individual features to check. [v2: use %s in pr_msg to fix a -Wformat-security warning] Signed-off-by: -
Kir Kolyshkin authored
Rephrase, Remove some extra repeated words, obey 80 columns. Signed-off-by:
-
Kir Kolyshkin authored
* Fix English and rephrase * Mark with curly braces that PID and NS_FILE are exclusive options * Fix 80 columns violations * Remove usage examples * Remove the "experimental feature" warning * Add an empty line before "Check options" header As for removals, I believe --help output is not the proper place for examples or notices. Was: -J|--join-ns NS:PID|NS_FILE[,EXTRA_OPTS] Join exist namespace and restore process in it. Namespace can be specified in pid or file path format. --join-ns net:12345 or --join-ns net:/foo/bar. Extra_opts is optional, for now only user namespace support: --join-ns user:PID,UID,GID to specify uid and gid. Please NOTE: join-ns with user-namespace is not fully tested. It may be dangerous to use this feature Check options: Now: -J|--join-ns NS:{PID|NS_FILE}[,OPTIONS] Join existing namespace and restore process in it. Namespace can be specified as either pid or file path. OPTIONS can be used to specify parameters for userns: user:PID,UID,GID Signed-off-by: -
Kir Kolyshkin authored
There is no need to have it here. Also, remove curly braces around {net} to avoid confusion. Was: --empty-ns {net} Create a namespace, but don't restore its properies (assuming it will be restored by action scripts) Now: --empty-ns net Create a namespace, but don't restore its properies (assuming it will be restored by action scripts) Signed-off-by: -
Kir Kolyshkin authored
* Simplify phrases, removing duplicate words -- saving 1 line * Drop <>, use UPPERCASE for variable parts as in other places * Obey 80 columns Was: --inherit-fd fd[<num>]:<existing> Inherit file descriptors. This allows to treat file desc riptor <num> as being already opened via <existing> one and ins tead of trying to open we inherit it: tty[rdev:dev] pipe[inode] socket[inode] file[mnt_id:inode] Now: --inherit-fd fd[NUM]:RES Inherit file descriptors, treating fd NUM as being already opened via an existing RES, which can be: tty[rdev:dev] pipe[inode] socket[inode] file[mnt_id:inode] Signed-off-by: -
Kir Kolyshkin authored
* Fix typos ("an user", "retore") * Rephrase Signed-off-by: -
Kir Kolyshkin authored
In general, we do not end the [last] sentence of an option description with a period. In a few cases, we do that -- let's fix it. Signed-off-by:
-
Kir Kolyshkin authored
* fix a typo (descrition -> description) * add a comma before "but" * remove a period at the end of the sentence Was: --cgroup-props-file FILE same as --cgroup-props but taking descrition from the path specified. Now: --cgroup-props-file FILE same as --cgroup-props, but taking description from the path specified Signed-off-by: -
Kir Kolyshkin authored
* fix a typo (usig) * slightly rephrased * remove a period at the end Signed-off-by:
-
Kir Kolyshkin authored
Hopefully without losing any meaning, but now it fits in 80 cols Signed-off-by:
-
Kir Kolyshkin authored
Such a lengthy description is not quite suitable for --help output. Also, it violates 80 columns and looks ugly as a result. Fix both issues. Was: --skip-in-flight this option skips in-flight TCP connections. if TCP connections are found which are not yet completely established, criu will ignore these connections in favor of erroring out. Now: --skip-in-flight skip (ignore) in-flight TCP connections Signed-off-by: -
Kir Kolyshkin authored
* add missing space between option and the argument * mark argument as optional * fix English * obey 80 columns width Was: -x|--ext-unix-skinode,.. allow external unix connections (optionally can be assign socket's inode that allows one-sided dump) Now: -x|--ext-unix-sk [inode,...] allow external unix connections (optional arguments are socketpair inode(s) that allow one-sided dump) Signed-off-by: -
Kir Kolyshkin authored
There is no need for empty line. Signed-off-by:
-
Kir Kolyshkin authored
It is somewhat hard to fully describe --cpu-cap in --help output, but let's at least say that: - option is used to either write or check capabilities; - the argument is a comma-separated list; - empty argument means "all". Also, while saying it, contain ourselves within 80 columns of output. The last item requires more work of course. I'm not sure about others, but I often work in terminals which are 80 columns wide, and non-wrapped output looks pretty ugly. I mean, we surely can be better than 'adp'. Signed-off-by:
-
Andrei Vagin authored
We need to allow read/write access for these directories to execute tests in user namespaces. zdtm.py does this too, but it is racy if we run a few tests in parallel. ------------------------ grep Error ------------------------ (00.748406) 5: Error (criu/files-reg.c:1487): File zdtm/static has bad mode 040777 (expect 040775) (00.752027) 1: Error (criu/cr-restore.c:1132): 5 exited, status=1 (00.790562) Error (criu/cr-restore.c:1135): 88 killed by signal 9: Killed (00.790623) Error (criu/cr-restore.c:2019): Restoring FAILED. ------------------------ ERROR OVER ------------------------ Signed-off-by:
-
Laurent Dufour authored
The Power 8 introduces the transactional memory (TM) operations (see Power ISA 3.0 for details). The support for the transactional memory operation during the checkpoint and restart requires extended ptrace API provided by the kernel 4.8. When checkpointing a thread while a transactional memory operation is in progress, the TM checkpointed state is checkpointed through the new ptrace API. If these new APIs are not available, the checkpoint is aborted and an explicit error is reported. At restart time, the TM state is pushed on the stack frame to be reloaded by the kernel when reading the stack frame. Only suspended TM operation could be checkpointed since active one will be aborted once a system call is made. Suspended operation will be aborted as well, and the checkpointed thread is expected to handle the TM failure as usual (retrying is a good option). Signed-off-by:
-
Laurent Dufour authored
Since the Transactional memory state will contains VSX, VMX and FP registers, extracting the common code copying data to protobuf buffer in separate functions. Signed-off-by:
-
Laurent Dufour authored
The new constant NVSXREG is defining the number of double word needed to be save to get the remaining part of the VSX registers to be save. A major part of the VSX registers is saved when saving FPU and Altivec registers. Signed-off-by:
-
Laurent Dufour authored
When dealing with the number of Altivec registers (VR), we should use the NVRREG constant defined in system file /usr/include/powerpc64le-linux-gnu/sys/ucontext.h. However this constant take in account the extra quad word containing vrsave in split vectors so we must remove 1 to get the exact number of registers VR. Signed-off-by:
-
Laurent Dufour authored
Don't display an error message when the checkpointed data read at restart time are corrupted. Signed-off-by:
-
Laurent Dufour authored
No more use C++ comment style Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Currently when we create peers we don't consider if they were owned by someone else. Lest carry uid/gid into image and restore then. https://github.com/xemul/criu/issues/198Signed-off-by:
-
Cyrill Gorcunov authored
They are zero and may clash one day. Signed-off-by:
-
Andrei Vagin authored
It gives us more information why a test hasn't completed in time. Signed-off-by:
-
Dmitry Safonov authored
Fixes: cow01.c: In function 'parent_check': ../lib/zdtmtst.h:120:11: error: format '%lx' expects argument of type 'long unsigned int', but argument 7 has type 'uint64_t {aka long long unsigned int}' [-Werror=format=] test_msg("FAIL: %s:%d: " format " (errno = %d (%s))\n", \ ^ cow01.c:287:5: note: in expansion of macro 'fail' fail("%s[%#x]: %p is not COW-ed (pagemap of " ^~~~ In file included from inotify_system.c:14:0: inotify_system.c: In function 'read_set': ../lib/zdtmtst.h:117:11: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Werror=form at=] test_msg("ERR: %s:%d: " format " (errno = %d (%s))\n", \ ^ inotify_system.c:299:3: note: in expansion of macro 'pr_perror' pr_perror("read(%d, buf, %lu) Failed, errno=%d", ^~~~~~~~~ deleted_dev.c:53:36: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type '__dev_t {aka long long unsigned int}' [-Werror=format=] test_msg("mode %x want %x, dev %lx want %lx\n", ^ deleted_dev.c:53:45: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'dev_t {aka long long unsigned i nt}' [-Werror=format=] test_msg("mode %x want %x, dev %lx want %lx\n", ^ ../lib/zdtmtst.h:117:11: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'off64_t {aka long long int ' [-Werror=format=] test_msg("ERR: %s:%d: " format " (errno = %d (%s))\n", \ ^ Nothing really interesting, but printings with right format specifier. Signed-off-by:Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by:
-
Dmitry Safonov authored
It looks like, on arm32 in <features.h>: #ifdef _XOPEN_SOURCE # define __USE_XOPEN 1 # if (_XOPEN_SOURCE - 0) >= 500 # define __USE_XOPEN_EXTENDED 1 /* ... */ And ptsname(), unlockpt(), grantpt() are under: #ifdef __USE_XOPEN_EXTENDED extern int grantpt (int __fd) __THROW; extern int unlockpt (int __fd) __THROW; extern char *ptsname (int __fd) __THROW __wur; #endif /* ... */ Fixes: pty00.c:50:2: error: implicit declaration of function 'grantpt' [-Werror=implicit-function-declaration] grantpt(fdm); ^~~~~~~ pty00.c:51:2: error: implicit declaration of function 'unlockpt' [-Werror=implicit-function-declaration] unlockpt(fdm); ^~~~~~~~ pty00.c:52:14: error: implicit declaration of function 'ptsname' [-Werror=implicit-function-declaration] slavename = ptsname(fdm); ^~~~~~~ pty00.c:52:12: error: assignment makes pointer from integer without a cast [-Werror=int-conversion] slavename = ptsname(fdm); ^ Signed-off-by: -
Dmitry Safonov authored
Fixes: maps03.c: In function 'main': maps03.c:15:32: error: result of '10l << 30' requires 35 bits to represent, but 'long int' only has 32 bits [-Werror=shift-overflow=] mem = (void *)mmap(NULL, (10L << 30), PROT_READ | PROT_WRITE, ^~ maps03.c:22:9: error: result of '4l << 30' requires 34 bits to represent, but 'long int' only has 32 bits [-Werror=shift-overflow=] mem[4L << 30] = 1; ^~ maps03.c:23:9: error: result of '8l << 30' requires 35 bits to represent, but 'long int' only has 32 bits [-Werror=shift-overflow=] mem[8L << 30] = 2; ^~ maps03.c:30:13: error: result of '4l << 30' requires 34 bits to represent, but 'long int' only has 32 bits [-Werror=shift-overflow=] if (mem[4L << 30] != 1 || mem[8L << 30] != 2) { ^~ maps03.c:30:35: error: result of '8l << 30' requires 35 bits to represent, but 'long int' only has 32 bits [-Werror=shift-overflow=] if (mem[4L << 30] != 1 || mem[8L << 30] != 2) { ^~ Proceses virtual address space is smaller than 4Gb - omit this test for those archs. Signed-off-by: -
Pavel Emelyanov authored
As RPC server the swrk mode is used which, in turn, is easily used by nice lib/py/criu.py thingie from Ruslan. Signed-off-by: -
Pavel Emelyanov authored
Now we have a single place that is really about calling criu as CLI tool inside this class, so pull one out as a preparation to having RPC support. Signed-off-by: -
Pavel Emelyanov authored
In the criu_cli class there's the whole bunch of useful code which not CLI-specific, so drop the _cli suffix. Signed-off-by: -
Cyrill Gorcunov authored
When migrating process it might not have slave tty peers at all so instead of exiting early just wait for its real usage and only then fail. Reported-by:
Manuel Rodríguez Pascual <manuel.rodriguez.pascual@gmail.com> Signed-off-by:
-
