- 05 Oct, 2016 3 commits
-
-
Pavel Emelyanov authored
This makes the API cleaner -- now we tell to parasite_dump_pages_seized only two things -- whether it's pre-dump or not and, if not, whether this is lazy dump. And make it do all the other decisions himself. Signed-off-by:
Pavel Emelyanov <xemul@virtuozzo.com> Acked-by:
Mike Rapoport <rppt@linux.vnet.ibm.com>
-
Pavel Emelyanov authored
Signed-off-by:
-
Pavel Emelyanov authored
This is to make it easier to extend this logic further. Signed-off-by:
-
- 27 Sep, 2016 14 commits
-
-
Kir Kolyshkin authored
Signed-off-by:
Kir Kolyshkin <kir@openvz.org> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Kir Kolyshkin authored
This adds a way to re-enable justification and hyphenation for the man page (which in enabled by default in troff but then Docbook explicitly disables it). The man page looks better this way. The reason why hyphenation for man pages is disabled by Docbook is "The problem is that groff is not particularly smart about how it does hyphenation; it can end up hyphenating a lot of things that you don't want hyphenated". The reason why justification for man pages is disabled by Docbook is "justified text looks good only when it is also hyphenated. Without hyphenation, excessive amounts of space often end up getting between words, in order to "pad" lines out to align on the right margin". I carefully checked the resuling man page using both terminal output on 80 columns and the PS/PDF generated. In both cases hyphenation looks normal, i.e. I don't see any unwanted cases of extra hyphenation. Same for justification. Signed-off-by:
-
Kir Kolyshkin authored
This is an attempt to cleanup the man page. I am very sorry this comes in this one big patch. Here are the changes: 1. Use *BOLD* for literals, 'ITALIC' for arguments (variable substituions) 2. Do not use <> for arguments, as they are already marked so (italic) 3. Remove details about "criu exec" and remote syscalls execution; add note that it's obsoleted by Compel. 4. Some descriptions are shrunk, some made longer, many are rephrased. 5. Formatting: use second-level lists (*value*:::) where appropriate (mostly instead of bulleted lists of values). 6. Properly show comma-separated lists of arguments (with second pair of [] and ... 7. Proper use of terms 'option' and 'argument' (*--option* 'argument'). 8. Other fixes to formatting and English (such as missing a/the articles). ... 98. Change author to be "the CRIU team". 99. Update copyright years, copyright holder is Parallels Holdings. [v2: rebase] Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Kir Kolyshkin authored
I was not able to find a way to make a target in sub-makefile (such as "cd Documentation && make pdf") without this hack. If there's a better way, please let me know Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Dmitry Safonov authored
Let there be more make-tests. Cc: Adrian Reber <adrian@lisas.de> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
Dmitry Safonov <dsafonov@virtuozzo.com> Acked-by:
-
Stanislav Kinsburskiy authored
Signed-off-by:
Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> Signed-off-by:
-
Stanislav Kinsburskiy authored
Threads must share fs struct. Without this path each thread has it's own fs struct. Signed-off-by:
-
Pavel Emelyanov authored
After this the mount.c is no longer the fattest .c in the tree: - before 3947 criu/mount.c 3179 criu/cr-restore.c 2622 criu/proc_parse.c 2095 criu/tty.c - after 3179 criu/cr-restore.c 3170 criu/mount.c 2623 criu/proc_parse.c 2095 criu/tty.c One "not move" thing is -- since fstype array is static to the filesystems.c and mount.c needs to access fstype[1] for auto mounts, the fstype_auto() call is added. Signed-off-by: -
Kirill Tkhai authored
When m and pa are mounted in the same directory, rpath is initialized to empty string (rpath[0] points to '\0'). In this case snprintf() at the bottom of function makes path have '/' at the end. In further, function validate_shared(), which uses the result, calls find_shared_peer() and fails to find a peer. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by:
Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
-
Pavel Emelyanov authored
Signed-off-by: -
Pavel Emelyanov authored
Signed-off-by: -
Pavel Emelyanov authored
Signed-off-by: -
Pavel Emelyanov authored
Signed-off-by: -
Pavel Emelyanov authored
The plan is to describe them all more carefully. Signed-off-by:
-
- 26 Sep, 2016 23 commits
-
-
Tycho Andersen authored
Signed-off-by:
Tycho Andersen <tycho.andersen@canonical.com> CC: Kir Kolyshkin <kir@openvz.org> Signed-off-by:
-
Tycho Andersen authored
Signed-off-by:
-
Tycho Andersen authored
To mimic the environment that systemd is in when it causes the problem, we preserve a prefix cgroup path across checkpoint and restore which the tasks live below, and then we open a fd to this path. Without --cgroup-root /prefix on dump, this test fails: (00.030429) 32: Error (criu/files-reg.c:1487): File home/ubuntu/criu/test/zdtm/static/cgroup02.test/zdtmtst/prefix has bad mode 040600 (expect 040777) Signed-off-by:
-
Pavel Tikhomirov authored
In commit 07d259f365f2 ("cgroup: support --cgroup-root on dump too") criu starts to understand --cgroup-root option on dump, but our cgroup02 test in cgroup02.desc file sets these opt to /newroot unintentionaly, as on dump we don't have /newroot dump fails: https://ci.openvz.org/job/CRIU/job/CRIU-x86_64/branch/criu-dev/989 ======================== Run zdtm/static/cgroup02 in h ========================= Start test Test is SUID ./cgroup02 --pidfile=cgroup02.pid --outfile=cgroup02.out --dirname=cgroup02.test Run criu dump =[log]=> dump/zdtm/static/cgroup02/30/1/dump.log ------------------------ grep Error ------------------------ (00.023103) Error (criu/cgroup.c:620): cg: failed walking /proc/self/fd/10/newroot for empty cgroups: No such file or directory (00.023129) Error (criu/cr-dump.c:1359): Dump core (pid: 30) failed with -1 (00.023944) Error (criu/cr-dump.c:1675): Dumping FAILED. ------------------------ ERROR OVER ------------------------ So fix this by using restore-only ropts instead of opts. Signed-off-by:Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by:
-
Andrei Vagin authored
It will be used in next patches Signed-off-by:
-
Markus Knetschke authored
The field fs_type field of fd_parms is already long Additionally the glibc man page says "Using unsigned int for such variables suffices on most systems." referring the minimum width of variables holding fs_type There are already fs_types who sets the highest bit (CIFS, BTRFS HPFS...) which interfere with the error check in dump_one_reg_file_cond (fs_type < 0) through the cast into signed int and after this into long Fixes error while dumping programs on a btrfs partition Signed-off-by:
Markus Knetschke <markus.knetschke@gmail.com> Signed-off-by:
-
Tycho Andersen authored
I suspect this snuck in when I was build testing code. Anyway, it shouldn't be here :) Signed-off-by:
-
Andrei Vagin authored
Currently we remap task_entries but it can be used from a sigchld hanler. We need to block sigchld to remap task_entries and unlock it when a restorer sigchld handler is set. Signed-off-by:
-
Andrei Vagin authored
ksigfillset is the same for all architectures and here is no reasons to duplicate the same code many times. In addition, this patch addes ksigemptyset and ksigaddset. They will be used in the next patch. Signed-off-by:
-
Tycho Andersen authored
In the case where we don't rewrite anything, dirnew is never set, so we shouldn't reset anything, because we didn't do any work. Signed-off-by:
-
Kir Kolyshkin authored
C standard specifies that the first enum element is 0 and the next ones are +1 to a previous element (C90, "3.5.2.2 Enumeration specifiers"). Therefore, there is no need to explicitly specify element values. The explicit initializers were added in the first commit introducing this enum (commit 46e8aeed). While at it, let's also add a comma after the last element, for any future patch adding more elements to look better. No functional change. Cc: Ruslan Kuprieiev <rkuprieiev@cloudlinux.com> Signed-off-by:
Ruslan Kuprieiev <rkuprieiev@cloudlinux.com> Signed-off-by:
-
Tycho Andersen authored
The problem here is again caused by systemd :). Every process lives in some child cgroup and not the root one, so we end up with a bunch of stuff like: /init.scope /system.slice/... /user.slice/... and nothing in the root cgroup. However, systemd opens /sys/fs/cgroup/systemd, changes the perms, and keeps a fd around. Unfortuantely, we don't track the perms on the "real root" cgroup here, because nothing is at that level, so when we restore, our cgroup perms changing code doesn't catch this perms change, and we get: (00.361723) 1: Error (criu/files-reg.c:1487): File sys/fs/cgroup/systemd has bad mode 040755 (expect 040775) To fix this, let's just support the --cgroup-root argument on dump too, and rewrite the cgroup paths we dump accordingly. Signed-off-by:
-
Tuan T. Pham authored
From 5f6b24723b1d029d3c764aaa8dea31b8497c3905 Mon Sep 17 00:00:00 2001 From: "Tuan T. Pham" <tuan@vt.edu> Date: Thu, 8 Sep 2016 03:42:12 -0400 Subject: [PATCH] Add script to install required packages to compile in Debian In order to setup an environment to compile and to test CRIU from source, we need to have required packages in Debian environment.[^0] This script and its package list will help setting it up. contrib/debian/dev-packages.lst: * List of required packages for Debian development environment scripts/install-debian-pkgs.sh: * A simple bash script instaling the required Debian packages [0]: https://criu.org/InstallationSigned-off-by:
Tuan T. Pham <tuan@vt.edu> Signed-off-by:
-
Cyrill Gorcunov authored
In case if there is no CLONE_NEWCGROUP on root namespace mask the @private member remains nil and comparision in mounts_sb_equal leads to nil dereference. CC: Tycho Andersen <tycho.andersen@canonical.com> Signed-off-by:
-
Tycho Andersen authored
v2: add cgroup04.hook which removes the cgroups in between, so things are actually restored :) Signed-off-by: -
Tycho Andersen authored
v2: don't try to write "" to devices.allow, just skip it since we write 'a' to devices.deny everywhere anyway. v3: leave cgroup prop name as "devices.list" so it is caught in the later tests for special-ness. also, don't write the last devices entry twice. Signed-off-by: -
Adrian Reber authored
Signed-off-by:
Adrian Reber <areber@redhat.com> Signed-off-by:
-
Kir Kolyshkin authored
C standard specifies that the first enum element is 0 and the next ones are +1 to a previous element (C90, "3.5.2.2 Enumeration specifiers"). Therefore, there is no need to explicitly specify element values. The explicit initializers were added in commit 56763837 (scripts: Add ACT_MAX limit and make @action_names being const) but I do not see the need for them in there either. No functional change. Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Tycho Andersen authored
new_controller() returns NULL on error, so let's check for that. Signed-off-by:
-
Eugene Batalov authored
Before this patch vma sizes were hardcoded and weren't derived from PAGE_SIZE value. But all the actions with these vmas are based on PAGE_SIZE value. That's why maps008 on PowerPC with "huge" PAGE_SIZE of 64k was simply terminating due to invalid memory access. This commit sets vma sizes to safe values derived from PAGE_SIZE. New sizes are enough to perform all the actions test does with vmas. Tested-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Eugene Batalov <eabatalov89@gmail.com> Signed-off-by:
-
Kirill Tkhai authored
This is need to catch the moment when binfmt_misc in mainline kernel is virtualized Signed-off-by:
-
Kirill Tkhai authored
In case of mount image is not containing binfmt_misc mountpoint, add temporary mountpoint to mount tree and try to restore binfmt_misc content in ordinary way. Then, umount temporary mountpoint. v4: New v5: Check for opts.has_binfmt_misc to determine if image presents v6: Check for binfmt_misc_list to determine if binfmt_misc entries present Signed-off-by:
-
Kirill Tkhai authored
Umount does not remove binfmt_misc content. If it's mounted once again, the same entries remain registered. Criu does not dump content of umounted binfmt_misc. So, after C/R we lose it at all. This patch forces mounting of unmounted binfmt_misc after we collected mountpoints. If it's unmounted, we mount it back and add this mount to the tree of collected mounted mountpoints. Further, binfmt_misc content is dumped in usual way with the only difference, that mount point itself is not dumped. v2: Print error in case of umount() fail. Move add_forced_mount() to another patch. v3: Close binfmt_misc dir before its umount(). v4: Do not dump forced mounted mountpoint. v5: Do not search for binfmt_misc mounted: use opts.has_binfmt_misc. Do not count number of entries in binfmt_misc directory. v6: Add CRTIME_MNT_ID. Make mount function generic. Signed-off-by:
-
