This one allocates a memory, that will be shared (MAP_SHARED)
between all the subsequent children. This can now be just used
for fd resote, later it will be required at inet socket port
binding.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The implementation is rather straightforward. One thing to note
is that non-single membership of each type is not supported. It
can be done, but I'm unaware of any software doing so.

Note: the pb show routine should be tuned to support showing bytes.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Broken by 92b6d86c.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

No test for it, sorry :( There's no easy way to check it works.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

We hash socket with inode and family, but search only by inode. Well,
yes, family should match, since all sockets are in one sockfs in kernel,
but let's make sure _we_ did things right by checking the family as well.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It's in net-next already and does provide all we currently
need (and more). Implementation is like for inet and unix
sockets.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

zdtm.sh copies all required libraries in a new root
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

protobuf.c: In function ‘pb_show_msg’:
protobuf.c:384:68: error: ‘fsize’ may be used uninitialized in this function [-Werror=uninitialized]
protobuf.c:247:9: note: ‘fsize’ was declared here

The warning about 'may be uninitialized' is false -- the BUG() is a never-returning function.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

v4:
1) Only address specificator ('A') left

New custom specificators:

'A': output as socket address
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

v2:
1) parser updated to properly parse strings like this: "11:%x 1:%d"

Protobuf generic show function now accept a string with pretty specificators.
The string have to look like below (an example):

"0:%d 3:%u"

where numbers with colon specifies field number (the same number as in
proto-file) and "%[a-zA-Z]" specifies output format.
If pretty specificator for specified for a field, then it will be used for
output instead of generic hexidecimal view.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Let's pass field structure to show functions. Hope, it makes the mess less
anoying...
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Will be usefull later with "pretty" show support.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

"depth" variable was moved to field structure.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Enable debugging only if DEBUG=1 provided.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Since we use some kernel tricks for CMSG_FIRSTHDR
some compilers (in particular gcc version 4.4.5
20110214 (Red Hat 4.4.5-6)) do complain about strict
aliasing.

Thus pass -fno-strict-aliasing to be on the same
coast as kernel is.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

When we fork a pidns init there's no need in specifying its pid,
as it will be autogenerated to 1. Clean the code not to mess with
the last_pid sysctl at all in that case, rather than just omitting
the write into it.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

A test will be executed in new set of namespaces if the environment
variable ZDTM_NEWNS is set. A pid of the root task will be written in
$ZDTM_PIDFILE and a root fyle system will be changed on $ZDTM_ROOT.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

When we restore a pid namespace the root task will get some unknown pid
in the original (i.e. -- the ns crtools a launched from) one. To find
this pid out one can use this option -- it will make the pid obtained by
the new init to be written into a pid file.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It's required for compiling on RHEL6
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

If netns is dumped, crtools fails if it collects unsupported sockets.

If netns isn't dumped, crtools will fail only
if an unsupported socket should be dumped.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Most part of services (ssh, httpd, ...) create two separate sockets
one for ipv4 and one for ipv6. If IPV6_V6ONLY isn't dumped, bind() returns
EADDRINUSE

v2: use do_dump_opt and initialize yes = 1
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Now crtools checks address, but it may be zero. For example,
a listen socket is bound to zero address to accept connections
from any addresses.

v2: add a comment about zero port
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It doesn't makemuch sense in pulling this further. The generic genid generation seems to
be enough for eny file type.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

There is no need in 6 receive callbacks -- we can find out family and protocol
(and thus -- type) out of the inet_diag_req_v2 passed through transparent arg
of nlk request engine.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

There are more in test/ (and checkpatch.pl crashes in the middle =),
but seem to be all.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>