Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This allows us to detect nonlinear mappings.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

While been playing with sockets dumping I found a case where
we exit without descriptive error message. Fix it.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

I'm a paranoiac.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Only snd and rcv bufs and timeouts. Just as an example, others will be adder
sequentially.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Those sitting on the SOL_SOCKET level are common to different
socket families and will be handled in a generic code.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Since event polling depends on other files
to be opened we split main files list into
two parst -- event poll files and all other
files, thus defer the creation of eventpoll
files in prepare_fds().
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

They looks better in this state
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Now log messages may be splitted by pid
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

If the option --log-pid is set, each process will have an own log file.
Otherwise PID is added to each log message.

A message can't be bigger than one page minus some bytes for pid.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It will fall through all the other checks, but let's do it
explicitly for better code understanding.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This saves some space on dynamic file_desc and makes file_desc_ops
looks closer to fdinfo_ops used on dump.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

No functional changes, just a code move.

TODO:

* need to write personal make_gen_id implementations for special
files (device and pos is const for them effectively)
* need to merge dump ops with restore ones (file_desc_ops)
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Now all the fds dump look very similar and we can reimplement
it via indirect calls.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Reg files are those obtained by open() syscall on restore.

Pipes should be checked to belong to pipefs (fifos are not supported
yet).
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Funny, but kernel reports some of them with []-s and some (well,
ok, inotofy only) without...
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

v2:
 - open_mount is cleaned up
 - byte-stream hex conversion remains untouched since
   strtol is flipping numbers to LE manner
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

At moment only open_mnt_root is there, which is
needed for inotify restore.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

To restore inotify we need to know the
mount point device numbers, so this helper
parses /proc/pid/mountinfo file for that.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Need it for inotify restore.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

v2:
 - Move everything into eventpoll.[ch]
 - Use rst_file_params
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

v2:
 - Pass initial counter value to eventfd call
   (can't pass flags here since they are obtained
    with fcntl and must be restored same way or
    restore will fail)
 - Use rst_file_params for flags and owner restore
 - Use eventfd.[ch] instead of eventfs.[ch]
 - Move show funcs to eventfd.c
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Will need it for eventpoll/eventfd/inotify.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This is also a code move plus two changes:

* shmems renamed to dump_shmems
* shmem area size is shared with restorer (it's one page for both for now)
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

No changes, just code move (and rename of shmems variable).
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Just a codemove, no real changed.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Also convert all ino into %x format.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

We use mincore to check which pages we should take with us into
the image. The anonymour present or swapped should go, file present
but not cow-ed should not.

The mincore syscall wasn't very helpful with this -- it didn't detect
swap, but did detect some non present pages (pagecache). Plus it
didn't know anything about cow-ing filemaps.

Andrey Morton suggested to use the pagemap file in proc, but it lacked
the importaint stuff -- the cow filemap bit. Now it's there and we
can switch to using it.

The mincore usage for shared memory is still there, as for _that_ case
it's correct.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Dumped pages are those taken to the image
Skipped pages are those, sitting in RAM, but left there (file shared pages)
Total is the total amount of pages that fit into vmarea
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

* Split dump/restore options from show ones
* Structure the former list
* Add the --tcp-established one
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>