Just a code sanitation.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

We're filling some rst-mem data _after_ we get the self maps
list. This is a bug, since the restorer vma get forcedly mapped
into a place we get out of self-vmas-list.

Move the self-vmas-list getting after we allocate the memory
we need.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

write_pidfile() was taken out from cr-restore.c, where it was supposed to kill
child if unable to create pidfile. Now we're also using it at service/page-server where kill is redundant. So lets take out kill() from write_pidfile() back to cr-restore.
Signed-off-by: Ruslan Kuprieiev <kupruser@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This actually fixes a bug -- memory for shmem info was
not allocated dynamically, thus we were limited in the
amount of shmems to be restored.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

On restore we need differetn types of memory allocation.
Here's an engine that tries to generalize them all. The
main difference is in how the buffer with objects is being
grown up.

There are 3 types of memory allocations:

1. shared memory -- objects, that will be used by all criu
   children, but will not reach the restorer
2. shared remapable -- the same, but restorer would need
   access to them, i.e. -- buffer with objects will get
   remapped into restorer
3. private -- the same, but allocatedby each task for itself
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Depending on BITS_PER_LONG userspace representation of dev_t
may vary, so we need to choose proper encoding.
Signed-off-by: Igor Sukhih <igor@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Hi!

Now we're ignoring SIGCHLD from forked children.
This patch provides SIGCHLD handler, that will wait for child and write some
information about it's exit status to logfile.
Signed-off-by: Ruslan Kuprieiev <kupruser@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It has been a mistake to introduce this struct since the FPU state
is stored deep inside an ARM sigframe. A remnant of the struct
is left to make the code compatible with the universal declaration
of the routine sigreturn_prep_fpu_frame().
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The ARM VFP header is a part of the VFP frame that makes
it unreasonable to have frame initialization split into
two routines. This patch moerges the ARM version of
the routine sigreturn_prep_fpu_frame() into restore_fpu()
and reduces the former into a stub.
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The routine restore_fpu() contains two bugs:

1) it reads more bytes from the array ThreadInfoArm::fpstate::vfp_regs
   than it actually containes;

2) the value of the field ThreadInfoArm::fpstate::fpscr is dropped
   on the floor.
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It turned out that AArch64 uses the UAPI syscall numbering scheme
that is incompatible with x86. Unfortunately this kills the idea
of the unified syscall table and syscall generator.

Note that the following syscalls:

* open,
* mkdir,
* rmdir,
* unlink,

are declared obsolete in the UAPI. Moreover the syscall arch_prctl
doesn't exist in the UAPI.
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

An fpu_state_t instance shouldn't be stored in an ARM sigframe
that makes it necessary to generalize the way the FPU state is
accessed in the routine construct_sigframe()
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This patch introduces the routines ptrace_get_gpregs() and ptrace_set_gpregs()
that wrap the ptrace interface to get and set CPU registers respectively.
The motivation is to make the CRIU code be compatible with architectures that
don't support the PTRACE_GETREGS and PTRACE_SETREGS ptrace calls ---
the requests PTRACE_GETREGSET and PTRACE_SETREGSET are implemented instead.
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Required for simpler next patching.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

In case if checkpoint is failed or -R option passed
we need to remove link remap files created during
dump procedure.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It's been found that if -R (leave task running after checkpoint)
option passed we don't unlock network, nether we clean service
files (such as link remaps).

After a long discussion we choose the following path: if -R option
is passed, it means a user is quite confident in what he is doing
and consistency of the resources (file system) is achieved by
a user himself with help of post-dump script. Also a user knows
that the network will be unlocked and accept such case.

So here we check of -R being passed in command line and once
checkpoint complete we unlock the network.

Cleaning up of link remaps is addressed in another patch.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Currently if a network namespace is dumped and something fails, sockets
remain in repair mode. It's because cpt_unlock_tcp_connections is
executed only if network namespace is not dumped.

cpt_unlock_tcp_connections disables repair mode for sockets and drops
netfilters. netfilters are not used in case of network namespaces.

v2: don't execute network-unlock scripts, if network namespace are not
    dumped.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

These are inherited from parent on fork(), thus need to put them in
clean state.
Signed-off-by: Ruslan Kuprieiev <kupruser@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Ruslan Kuprieiev <kupruser@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The only place left, that runs parasite by hands -- unmap().
Now we can use parasite_run() for that.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This one keeps registers and sigmask for running thread. Will
be used for simpler parasite management.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

In case if we need to use vdso proxy the memory area
which holds restorer also has a place for vdso proxy
code itself, so on final pass we should not unmap it,
otherwise any call to vdso function will cause sigsegv.

IOW, the memory before final "cleanup" pass of restorer
might look as

    +-----------+---------+     +-------------+------+
    | bootstrap | rt-vdso | ... | application | vdso |
    +-----------+---------+     +-------------+------+
                       ^                         |
                       `-------------------------+

and we have redirected "vdso" code to jump to "rt-vdso".
After final pass the memory must look as

                +---------+     +-------------+------+
                | rt-vdso | ... | application | vdso |
                +---------+     +-------------+------+
                       ^                         |
                       `-------------------------+

I noticed this problem during container migration
testing, the container itself was suspended on 2.6.32
OpenVZ kernel with apache running inside, and any attempt
to connect to apache caused apache to crash.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The ctl->sig_blocked in this place is the same as sigframe's one,
as ctl's one was copied into sigframe's few steps before.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

If parasite exited unexpectedly, CRIU gets SIGCHLD and handles it.
In sigchld handler we need to wait any child process.
Currently criu waits neighbours in its group, but a dumped
processes is in another group usually. Here is a typo.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>