Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

One of such things we use right now is the device for anon shmem
mappings backing. In the furure this can be extended to check for
various kernel features.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This is less useful than fixing typos in output messages, but anyway.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Someone has to do it, right?..
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

On error paths we don't explicitly close procfile.

CID 996191 (#5 of 6): Resource leak (RESOURCE_LEAK)
22. leaked_storage: Variable "f" going out of scope leaks the storage it points to.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Don't call close() with degative fd. For consistency
simply use close_safe here. All fds touched are initialized
either to valid fd or to value < 0 which pretty good handled
by close_safe helper.

CID 996212 (#1 of 1): Argument cannot be negative (NEGATIVE_RETURNS)
10. negative_returns: "fd" is passed to a parameter that cannot be negative.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Don't pass negative descriptor to install_service_fd

CID 996213 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
7. negative_returns: "new_logfd" is passed to a parameter that cannot be negative.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This guy touches a random page once per second and backs-up
what was touched. At the end it checks whether everything is
OK. It can be used to test how snapshots work -- take several
snapshots with several seconds pauses in betweem and restore
form the last.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This one is a little bit more tricky that dump. On restore we
should open the chain of pagemap-s (by "parent" links). Then for
every pagemap with in_parent set we should go to parent and ask
for the page. Parent, in turn, should properly determine where
the respective page is in his pagemap and position the page.img's
position respectively.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

It's quite simple -- get parent's pagemap before dumping memory,
then collect _full_ pagemap of task putting holes into page-pipe
when the page is (soft-dirty-clear && in-parent-map). At the end
reset task's soft-dirty bits.

This requires kernel support from
http://comments.gmane.org/gmane.linux.kernel.mm/98283Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

1. Directory with images may have a "parent" symlink pointing to the
   place where the previous snapshot is
2. Each pagemap will have "in_parent" bit, which means, that the
   pages for this pagemap entry are not in the respective page.img
   but in parent
3. New --leave-running option to use with --snapshot not to kill
   tasks after snapshot
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Now we have 2 forms of storing pages -- legacy pages.img and
new pagemap + pages image. We'll have one more (ovz) and the
pagemap + pages will be stacked (snapshot restore). Thus it's
handy to have this as an page-reader object.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The pagemap.img contains sorted iovs. Need to keep this array also
sorted even if holes are in there for simpler read on restore.

Separate ->write_hole callback since dump of hole and non-hole
will differ significantly.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Holes are regions, that don't have pages in them (i.e. -- no
pages in pipes). These holes are in separate iovs array since
we should have straight arrays of iovs for non-holes, which is
in turd required to push it into vmsplice in _one_ chunk.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Information about mount points is used for dumping fanotify.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The tcp repair manipulations require CAP_SYS_NET_ADMIN on
a calling task. Thus, if the task to restore is run from
non-root user, the tcp socket repair off will fail, but
restoration wouldn't abort.

Fix this by moving creds restore after tcp restore finish.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The fd in -> open callback is temporary (the files restoring
engine will re-open one under some other fd). But since we
add this fd to future repair off, this off will fail working
on wrong fd.

Move scheduling for repair-off into port-open where the corrent
fd is known.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The pipe retrieving shared libraries the test depends on

ldd $test_path $ps_path | awk '/^\s/{ print $1 }'

doesn't actually produce any output so all NS tests fail
bacause the system linker fails to locate shared libraries
the test program depends on. This patch fixes the pipe
to retrieve the list of libraries properly.
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Acked-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Use a PRI* format specifier to convert an integer of known size
to a string.
Signed-off-by: Alexander Kartashov <alekskartashov@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

@mnt_id do change on remount so exclude it from
compare.
Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Tested-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

* Call restore_ns on error paths.
* Use close_safe for the socket, because it can be reused

CID 996194 (#1 of 3): Resource leak (RESOURCE_LEAK)
6. leaked_handle: Handle variable "rst" going out of scope leaks the
handle.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

We use pr_perror, but after direct syscall calling the
errno is not initialized (and in PIE it doesn't even exists).
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

And simplify the code at the same time.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The constatns are in octal in all headers.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Before this patch crtools/test is bound to crtools/test/dump/crtools.XXXXXXX

It's a main reason why "make clean" deletes all content from crtools/test.

Always when you have a test bind mount. You have a test bind mount, when
a test is executed. You execute a test sometimes. So "make clean"
deletes all content sometimes;).

This patch fixes this problem.

Actually this patch fixes more significan problem. If / is a shared
mount (it's defult in FC19),
$ mount --bind crtools/test crtools/test/dump/crtools.XXXXXXX
will recursively copy all previous bind mounts.

E.g:

cd crtools/test
make -j 4
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.DMoEZv ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA/dump/crtools-root.DMoEZv ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.oLnVTw ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.DMoEZv/dump/crtools-root.oLnVTw ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA/dump/crtools-root.DMoEZv/dump/crtools-root.oLnVTw ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA/dump/crtools-root.oLnVTw ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.oLnVTw/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.DMoEZv/dump/crtools-root.oLnVTw/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA/dump/crtools-root.DMoEZv/dump/crtools-root.oLnVTw/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA/dump/crtools-root.oLnVTw/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.DMoEZv/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA/dump/crtools-root.DMoEZv/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0
/dev/mapper/vg-lv_root /root/crtools/test/dump/crtools-root.b86wVA/dump/crtools-root.7zQrDs ext4 rw,relatime,data=ordered 0 0

make -j 32 generates ~2^32 mounts.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

mnt_entry contains a few strings and they should be release too

CID 996198 (#4 of 4): Resource leak (RESOURCE_LEAK)
20. leaked_storage: Variable "pm" going out of scope leaks the storage
it points to.

CID 996190 (#1 of 1): Resource leak (RESOURCE_LEAK)
13. leaked_storage: Variable "new" going out of scope leaks the storage
it points to.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

pr_perror adds \n on its own, fix this typo.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

We usually print resources IDs in hex format,
so fix the places where we don't (it confuses
otherwise).
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

CID 996188 (#1 of 1): Resource leak (RESOURCE_LEAK)
13. leaked_storage: Variable sd going out of scope leaks the storage it points to.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

CID 996187 (#1 of 1): Resource leak (RESOURCE_LEAK)
10. leaked_storage: Variable "buf" going out of scope leaks the storage it points to.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

O_RSTR flag should be used instead for regular open_image
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Will need vpid there soon, so switch to using ctl instead.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

This saves some space on stack.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>