travis-ci: success for uffd: A new set of improvements
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Since commit 95009c4c6d5 (criu: pagemap: introduce advance() helper for
pagemap iteration) seek_pagemap_page traverses the entire pagemap, rather
than starts each time from the last pagemap that was used.
With large pagemaps (like, e.g. in maps05 case) the new behavior causes
exponential increase in amount of calls to skip_pagemap_page for every new
snapshot.
Let's restore the original behavior.

Fixes: #217
Reported-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

travis-ci: success for series starting with [01/21] build: install libnet-dev
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

By default, sockets03 doesn't set SIGPIPE handler to SIG_IGN. When run
by zdtm.py, it doesn't cause problem, because it inherits signal
handler. However, when run via vzt-cpt (which uses system() to launch
tests), it receives default handler (which would terminate test). As
result, test is guaranteed to fail, because it will attempt to write to
shutdown receiver and get SIGPIPE in the face.

travis-ci: success for test: Fix sockets03 default SIGPIPE handler not being set to IGN (rev2)
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Vitaly Ostrosablin <vostrosablin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

A hook to cleanup test temporary files

travis-ci: success for zdtm: Add binfmt_misc.hook
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

For easier debugging.

v2: Forward scripts messages to criu log using cr_system

travis-ci: success for scripts: Print error value in case of action script fail (rev2)
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Check that SO_PEERCRED socket options restored correctly.
Now it's not supported, thus test is marked as "noauto".

(It seems support of this feature will require "ghost tasks",
when we introduce them).

travis-ci: success for zdtm: Add sock_peercred test
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Now we remove a link_remap file when all its files are restored.
It is wrong, because something else may fail and we will not be
able to repeat an attempt to restore processes again.

travis-ci: success for files: remove link_remaps when everything has been restored
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

link-remap files has to be deleted only if processes have been
restored successfully. Otherwise we can want to repeat an attempt,
but it is imposible if some link-remap files were deleted.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Starting with 4.8 the kernel doesn't allow to create inodes
with a uid or gid unknown to an user namespace where a file
system was mounted.
036d523641c66 ("vfs: Don't create inodes with a uid or gid unknown to the vfs")
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

DESTDIR is mostly used by packagers (such as from rpm spec
or deb rules), or just to try installation, and normally
should be left unset/empty.

Setting it to / looks weird to me. Besides, by leaving it empty
we are making sure everything works if DESTDIR is not set.

Fix INSTALL.md accordingly.

travis-ci: success for Makefile.install: DESTDIR should be empty
CC: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Now it is impossible to find when a test has been started,
but sometimes we want to knwo which tests were running in a specified moment.

travis-ci: success for zdtm.py: add a test name into a progress line
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Each test has a process which controls other processes and
if it dies the other processes have to be killed.

travis-ci: success for zdtm: exit a test if the "root" process died
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

CID 173074 (#1 of 1): Resource leak (RESOURCE_LEAK)
9. leaked_handle: Handle variable sock going out of scope leaks the handle.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Just a little optimization (one syscall less).

travis-ci: success for Rectify 32-bit compatible C/R on x86
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

There's no such field in resp, only cr_errno

travis-ci: success for py: Fix resp.errno access
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>

No functional changes; this just improves uniformity.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

This will be used instead of currently existing per-fd
transport sockets, which are used on receive_fd stage.

v2: Create the socket before CR_STATE_FORKING state.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

INCLUDEDIR gonna be used in compel.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Should be easier to debug if the variable is not passed by accident.

travis-ci: success for series starting with [1/2] zdtm:mnt_ext_auto: avoid segfault if ZDTM_NEWNS is not set
Signed-off-by: Dmitrii Shcherbakov <dshcherbakov@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

If getenv returns a null pointer we get a segfault here.

Let's exit in a more sane way.

travis-ci: success for series starting with [1/2] zdtm:mnt_ext_auto: avoid segfault if ZDTM_NEWNS is not set
Signed-off-by: Dmitrii Shcherbakov <dshcherbakov@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Move error printouts to the call sites to keep "fast path" clearer.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

It seems that logging amount of skipped pages was useful for early
debugging of pre-dumps, but now it just creates a lot of noise for lazy
pages and pre-dump tests.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Don't append \n as pr_perror() already does it for us.

travis-ci: success for more pr_perror() usage fixes
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

In places where we are not supposed to print errno, or where
we already print in explicitly, use pr_err().

travis-ci: success for more pr_perror() usage fixes
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Use alias function attribute to provide memcpy(), memcmp()
and memset() in case we're not linking with libc. This is
needed as compiler can generate calls to those functions
(clang actually does that).

[v2: add comment, move aliases to under HAS_BUILTIN_*]

https://travis-ci.org/kolyshkin/criu/builds/174634847Idea-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

1. memcpy() last argument is size_t
2. memset() returns void *

Make our builtin_*() functions compatible.

https://travis-ci.org/kolyshkin/criu/builds/174634847Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Done with python pprint module (indent = 4, width = 80)
for files with more than one field in and with length
exceeding 80 characters.

Travised-by: https://travis-ci.org/xemul/criu/jobs/171350152
travis-ci: success for zdtm: Split long .desc lines
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

For portability sake, we gonna share this header.

travis-ci: success for Common headers
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Don't use compiler-provided memset in parasite.

Fixes: commit 86434deba0b4 ("x86: dump TLS entries from GDT").

Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Tycho reported that Debian uses custom LDFLAGS to
build criu, this flag get propagated into built-in
targets where we use $(LD) instead causing build
procedure to interrupt

|  LINK     arch/x86/syscalls.built-in.o
| ld: unrecognized option '-Wl,-Bsymbolic-functions'
| ld: use the --help option for usage information
| /«PKGBUILDDIR»/scripts/nmk/scripts/build.mk:141: recipe for target 'arch/x86/syscalls.built-in.o' failed

Lets make maintainers life easier and filter
out the flags we know never accepted by $(LD).
Reported-by: Tycho Andersen <tycho.andersen@canonical.com>
Tested-by: Tycho Andersen <tycho.andersen@canonical.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Sigframe pointer should be fixed size.
Convert members of rt_sigframe_ia32 to fixed-size.
After this patch dumping of compatible tasks works.

Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

org.tap4j.parser.ParserException: Error parsing TAP Stream: Invalid position of TAP Header.
It must be the first element (apart of Comments) in the TAP Stream.

Reported-by: Mr Jenkins
travis-ci: success for zdtm: move a tap header to a first line
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Remove getting opts from descriptors out from scm engine,
this stuff is pure criu thing, so make it collect the data.

The tricky change here is that parasite code needs memory
to keep fd_opts on. The memory is taken from parasite args
region, which is now bigger than it used to be. But that's
not a big deal, as previously this space was allocated on
the parasite stack (!, but with smaller chunks).

On the other hand, now we have one memcpy less, as opts are
put directly into the destination buffer.

travis-ci: success for files: Rework send/recv-fds to be more generic
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>