- 27 May, 2016 36 commits
-
-
Pavel Tikhomirov authored
Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by:
Andrew Vagin <avagin@virtuozzo.com> Signed-off-by:
Pavel Emelyanov <xemul@virtuozzo.com>
-
Pavel Tikhomirov authored
Signed-off-by:
-
Pavel Tikhomirov authored
Signed-off-by:
-
Pavel Tikhomirov authored
mldv1_unsolicited_report_interval and mldv2_unsolicited_report_interval are rounded up to (MSEC_PER_SEC / HZ)*k when set as in kernel they are saved in jiffies. As min HZ is 100, 10 is MAX_MSEC_GRANULARITY. Signed-off-by:
-
Pavel Tikhomirov authored
As changing disable_ipv6 sysctl for some device may change mtu sysctl for it we need to first check mtu, and only then set disable_ipv6. That can be done splitting our functions into two. Signed-off-by:
-
Pavel Tikhomirov authored
some sysctls have minimal value != 0 so we will also need to set their lower limit e.g. /proc/sys/net/ipv6/conf/all/mtu name possible states range accept_source_route "<0", ">=0" {-1, 0} medium_id "-1", "0", ">0" {-1, INT_MAX} src_valid_mark true, false {0, 1} tag any {INT_MIN, INT_MAX} Signed-off-by: -
Pavel Tikhomirov authored
Get arrays out of save_and_set and check_and_restore, as it is an overkill to give to the function wich should work with only one element of array the whole array. These makes them reusable in future test of ipv6 config. Signed-off-by:
-
Pavel Tikhomirov authored
First restore "all" and then "default"(and "dev") as for some ipv6 sysctls setting all can change the latter(forwarding, disable_ipv6) e.g.: echo 1 > /proc/sys/net/ipv6/conf/default/disable_ipv6 echo 0 > /proc/sys/net/ipv6/conf/all/disable_ipv6 cat /proc/sys/net/ipv6/conf/default/disable_ipv6 0 As changing disable_ipv6 sysctl for some device may change mtu sysctl do not optimize mtu's restore. Signed-off-by:
-
Pavel Tikhomirov authored
* old MAX_CONF_OPT_PATH should be enough for ipv6 path array as len('net/ipv6/conf//mldv2_unsolicited_report_interval') is 48 but len and size are almost back to back, so increase it a bit, to don't worry about it. reading stable_secret before it is initialized fails with EIO, we can safely skip dumping it in that case as in new netns it will be uninitialized by default v6: use __CTL_STR without len in image type v9: set flag CTL_FLAGS_READ_EIO_SKIP for stable_secret dumping Signed-off-by: -
Pavel Tikhomirov authored
* do not c/r mc_forwarding option it depends on multicast managment socket existence and is readonly. In addrconf_sysctl_disable->addrconf_disable_ipv6->dev_disable_change: On addrconf_notify + NETDEV_UP if idev->cnf.mtu6 differs from dev->mtu, sysctl mtu6 is overwritten. So changing disable_ipv6 sysctl for some device may change mtu sysctl for it and we need to restore disable_ipv6 first and only then mtu. Signed-off-by:
-
Pavel Tikhomirov authored
Signed-off-by:
-
Pavel Tikhomirov authored
use new SysctlEntry, leave old ipv4_conf_op as ipv4_conf_op_old for forward compatibility v4: use CTL_FLAGS_HAS instead of req[].has v5: use CTL_TYPE in sysctl_entries_equal v6: fix net_conf_op for string sysctls, add rconf to have requests conf at hand Signed-off-by:
-
Pavel Tikhomirov authored
int32 with boolean value in protobuf has the same size with bool, many sysctls are boolean but we don't lose anything by storing them in int32, so add only int32 and string fields will need string field for stable_secret ipv6 sysctl also such fromat allows us to easily handle non-present int sysctls we can check if we have it using has_*arg v3: rebase images/Makefile to criu-dev branch v4: use enum for type Signed-off-by:
-
Pavel Tikhomirov authored
v4: replace separate has pointer to CTL_FLAGS_HAS flag, second part in patch "net/ipv4: add net_conf_op to reuse for ipv6" v6: define CTL_FLAGS_HAS v7: also allow EIO on do_sysctl_op for optional sysctls like stable_secret and fix sysctl file to close in error path v9: add CTL_FLAGS_READ_EIO_SKIP to skip dumping stable_secret on EIO Signed-off-by:
-
Kirill Tkhai authored
MAP_FAILED is retval of lib'c mmap(). Direct syscall returns IS_ERR() in case of error. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
Andrew Vagin authored
criu dump should return an error in this case Signed-off-by:
-
Andrew Vagin authored
Here we try to enumerate all mount points and try to find one, which allows us to dump content of a file system. It's should be a root mount and its mount point should not be overmounted. We don't have a separate call-back to dump content of a file system. fstype->dump() isn't always requires access to a mount point (e.g. autofs), so we check overmounts in open_mountpoint(). $ cat /proc/61693/root/etc/redhat-release Fedora release 23 (Twenty Three) $ cat /proc/61692/mountinfo | grep '\s/tmp' 234 199 0:57 / /tmp rw shared:97 master:76 - tmpfs tmpfs rw,size=131072k,nr_inodes=32768 235 234 0:57 /systemd-private-dd74de99e1104383aa7cd6e27d3d0b8a-httpd.service-uFqNHk/tmp /tmp rw,relatime shared:98 master:76 - tmpfs tmpfs rw,size=131072k,nr_inodes=32768 v2: return an error if we can't dump a file system v3: try to find a mount point which allows to dump a file system v4: check that children are not overmounted a target mount instead of getting a mnt_id for a file descriptor. v5: add a special error code for unreachable mount points Signed-off-by:
-
Pavel Emelyanov authored
Next patch will put non-root task's PID into it, so this one is preparatory. But, as a bonus, we remove the need to unlink ths pid file in case of error :) Risk -- scripts might want to have pidfile, but we already have CRTOOLS_ROOT_PID environment in them for such cases. Signed-off-by: -
Andrew Vagin authored
Signed-off-by:
-
Tycho Andersen authored
Signed-off-by:
Tycho Andersen <tycho.andersen@canonical.com> Signed-off-by:
-
Tycho Andersen authored
Signed-off-by:
-
Andrew Vagin authored
gcc v6.0 and clang think that &next->pid.node can't be null. Here is an explanation from a kernel log (v3.12-5097-g1310a5a): """ the result of this expression is not defined by a C standard and some gcc versions (e.g. 4.3.4) assume the above expression can never be equal to NULL. The net result is an oops because the iteration is not properly terminated. """ $ gcc -v gcc version 6.0.0 20160406 (Red Hat 6.0.0-0.20) (GCC) $ python test/zdtm.py run -t zdtm/static/session00 ... $ gdb -c /tmp/core.61 criu/criu Program terminated with signal SIGSEGV, Segmentation fault. 598 if (&next->pid.node == NULL || next->pid.virt > pid) $ make CC=clang pstree.c:598:18: error: comparison of address of 'next->pid.node' equal to a null pointer is always false [-Werror,-Wtautological-pointer-compare] if (&next->pid.node == NULL || next->pid.virt > pid) Signed-off-by:Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Andrew Vagin authored
Signed-off-by:
-
Andrew Vagin authored
All task are collected in rbtree what allows us to search any task by a virtual pid for O(n log(n)). Signed-off-by:
-
Andrew Vagin authored
We already do this on restore to be able to search tasks by their virtual PID-s. Signed-off-by:
-
Andrew Vagin authored
Signed-off-by:
-
Andrew Vagin authored
Signed-off-by:
-
Andrew Vagin authored
The idea is to allow to dump and restore mounts of a specified block device. Options: dump: --external dev[MAJOR:MINOR]:VAL restore: --external dev[VAL]:DEVPATH If we find a mount with a specified block device, we set its type into FSTYPE__AUTO and write VAL into the "source" field. VAL is replaced on DEVPATH on restore. v2: use --ext-mount-map instead of --external on dump v3: clean up v4: use --external on dump and on restore v5: VAL:DEVPATH -> dev[VAL]:DEVPATH on restore Signed-off-by:
-
Cyrill Gorcunov authored
It never worked properly before because the pages might simply be not present in memory at all, so trying to fetch their contents via splice simply return the number of bytes successfully fetched which of course different from completed vma size. Thus correct implementation requires interactions with parasite page pulling: just read as much as kernel allows us and that's all. Util it's implemented -- zap it. Reported-by:
-
Cyrill Gorcunov authored
Reported-by:
Andrew Vagin <avagin@openvz.org> Signed-off-by:
-
Andrew Vagin authored
CID 159478 (#2 of 2): Resource leak (RESOURCE_LEAK) 8. leaked_handle: Handle variable sk going out of scope leaks the handle. Signed-off-by:
-
Andrew Vagin authored
Currently our pid allocator returns max_pid++ and it can return a pid which is bigger than kernel.max_pid. (00.821430) 5506: Error (cr-restore.c:1540): Pid 300 do not match expected 32768 v2: handle error code from insert_item() Signed-off-by:
-
Andrew Vagin authored
Currently we enumirate all children of the init task and if a task isn't a session leader, we create a helper, collect all children with this sid to the children list of this helper. When all children of the init task has been enumirated, we try to find a session leader for each helper. We use this way to enumirate all tasks only once. Now we are going to collect all tasks in rbtree, so we can find a sessial leader when we need it. It will not affect performance, because without searching a session leader, we can't add a helper to the tree. v2: rename lookup_pid to pstree_pid_by_virt use pstree_pid_by_virt in pstree_item_by_virt v3: handle session leaders in this patch too Signed-off-by: -
Andrew Vagin authored
It will allow us to find a free pid and will speed up searching an item by pid. The current algorithm to searching a free pid may return a value bigger that kernel.max_pid. v2: add a coment before insert_pid() rename root_rb to pid_root_rb and make it "static" v3: rename insert_{pid,item} into lookup_create_{pid,item} Signed-off-by: -
Andrew Vagin authored
Signed-off-by:
-
Andrew Vagin authored
I'm going to collect all pids in rbtree, but threads doesn't have pstree-entries, so we need a field to distinguish pstree_item-s from threads. Signed-off-by:
-
- 16 May, 2016 2 commits
-
-
Pavel Emelyanov authored
This is bugfix mostly release again. Also did some tunes for better integration with OpenVZ (action scripts), updated to support newer kernels improvements and removed pagemap greedy mode and --namespaces option. Signed-off-by: -
Pavel Emelyanov authored
This thing was used in the ancient days when we didn't have /proc/pid/ns files as links. The only used of it (images w/o the ids.img file) has been already removed in 2.1, so probably it's time to drop the option itself. Signed-off-by:
-
- 13 May, 2016 2 commits
-
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Being miss in first place. For tty-major we either should understand the driver we're handling, in the code above it's VT driver, so if minor is pointing somewhere else -- it's unknown tty. We need to look into every serial device we're going to support if we can c/r it without problem. Thus 'break' prevent us from potential problems. Signed-off-by:
Dmitry Safonov <dsafonov@virtuozzo.com> Signed-off-by:
-
