- 01 Apr, 2016 11 commits
-
-
Cyrill Gorcunov authored
Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Pavel Emelyanov <xemul@virtuozzo.com>
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Don't forget to call objectify. Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
No much point in carrying it in a separate file. Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
These tests check for file descriptor being assigned to the pid which is freed already, so check them in PID namespace only, otherwise the kernel may give PID someone else and the check from commit c4cf5f0b might trigger and stop testing procedure. Signed-off-by:
Tycho Andersen <tycho.andersen@canonical.com> Signed-off-by:
-
Dmitry Safonov authored
Before this would open file named '-' as log: ./criu/criu dump -t 20526 -o - But now it will print log into stdout. Charming. Signed-off-by:
Dmitry Safonov <dsafonov@virtuozzo.com> Signed-off-by:
-
Andrew Vagin authored
v2: set umask to 0000. It's required to generate gcda, gcno files Signed-off-by:
Andrew Vagin <avagin@virtuozzo.com> Signed-off-by:
-
Dmitry Safonov authored
Where it's possible to use glibc. Signed-off-by:
-
- 25 Mar, 2016 29 commits
-
-
Andrei Vagin authored
We need to adjust free_bytes each time when we change free_bytes. Fixes #140 Signed-off-by:
-
Sergey Bronnikov authored
- option --keep-going is not mandatory if we run a single testcase - show warning when we use --keep-going with a custom set of testcases - ignore --keep-going when we run a custom set of testcase (exit on 1st fail) Signed-off-by:
Sergey Bronnikov <sergeyb@openvz.org> Signed-off-by:
-
Cyrill Gorcunov authored
In commit 9469dae61c we've dropped implicit cleanups as a pattern but in images dir we use additional custom rules so simply drop files built. Signed-off-by:
-
Pavel Emelyanov authored
Sometimes when running tests manually it's tempting to prepare the list of tests to run in advance and then run only those. E.g. -- when testing a new feature that affects only _some_ tests. This option allows it. Signed-off-by: -
Cyrill Gorcunov authored
A typo. Signed-off-by:
-
Cyrill Gorcunov authored
If makefile is changed itself we've been not detecting it. Signed-off-by:
-
Tycho Andersen authored
Later (find_ext_ns_id, but probably others as well) we depend on the struct being zeroed in order to figure out whether or not to collect info about it. Let's make sure it is actually zeroed. Signed-off-by:
-
Tycho Andersen authored
See comment for details, but basically this mountopt can be completely wrong in some cases. Signed-off-by:
-
Cyrill Gorcunov authored
With cleanify helper we remove only they files we've been generating, not anything else. Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
Both never worked, we need to pass them as explicit parameter. Signed-off-by:
-
Dmitry Safonov authored
Each time I type `make clean` and find that my tags are cleaned and generated headers/c-files are deleted, I'm getting annoyed. Mostly it's about protobuf images definitions. (And then I need to run `make` and `make tags` again which is painful). I think, we may separate clean process on two parts, just like it's done in the kernel (omitting distclean): o Cleaning all binaries/objects, but leave enough to navigate o Clean everything compiled/generated/etc. In this patch pie blobs are still deleted on clean stage - I may fix it in the later patches. (they _should_ be regenerated on `make clean && make`) Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Dmitry Safonov authored
This will separate clean process on two parts: - deleting binaries/objects/temp - deleting generated files Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Andrew Vagin authored
------------------------ grep Error ------------------------ (00.011453) Error (files-reg.c:1136): Can't lookup mount=85 for fd=3 path=/var/lib/jenkins/workspace/CRIU-inhfd/test/report/criu-testreport.tap (00.011478) Error (cr-dump.c:1304): Dump files (pid: 4) failed with -1 (00.011903) Error (cr-dump.c:1606): Dumping FAILED. ------------------------ ERROR OVER ------------------------ Cc: Sergey Bronnikov <sergeyb@openvz.org> Fixes: c4e13bc92816 ("zdtm.py: add support of test reports in TAP format") Signed-off-by: -
Andrew Vagin authored
+ ./test/zdtm.py run --all -f best -x maps04 -x cgroup02 --norst --keep always usage: CRIU test suite run [-h] [-a] [-t TEST] [-T TESTS] [-f FLAVOR] [-x EXCLUDE] [--sibling] [--pre PRE] [--snaps] [--dedup] [--nocr] [--norst] [--iters ITERS] [--fault FAULT] [--sat] [--sbs] [--freezecg FREEZECG] [--user] [--page-server] [-p PARALLEL] [--dry-run] [-k {always,never,failed}] [--report REPORT] [--keep-going] CRIU test suite run: error: ambiguous option: --keep could match --keep-img, --keep-going It worked fine without the --keep-going option. [xemul: Remove the --keep-going and --report options, the run of zdtm.py is not of much interest for TAP ] Signed-off-by: -
Sergey Bronnikov authored
It was requested by Andrey. This patch adds details about failed testcase to a TAP report: TAP version 13 1..1 not ok 1 - zdtm/static/deleted_unix_sock # flavor h Signed-off-by: -
Sergey Bronnikov authored
add options --keep-going and --report (if it was absent) to run full testrun with report creation Signed-off-by:
-
Sergey Bronnikov authored
Signed-off-by:
-
Saied Kazemi authored
The "criu check" command to check if the kernel is properly configured to run criu is broken. The "criu check --ms" command used to be the way to tell criu to check only for features that have been merged upstream. But recent kernels have a set of features whose presence doesn't necessarily mean that dump or restore will fail but rather *may* fail depending on whether the process tree uses those features. This patch deprecates --ms and introduces --extra, --experimental, and --all. See "criu --help" or "man criu" for more info. Typical use cases are: $ sudo criu check <zero or more warnings and errors...> Looks good. $ echo $? 0 $ sudo criu check --extra <zero or more warnings and errors...> Looks good. $ echo $? 1 $ sudo criu check --extra <one or more warnings...> Looks good but some kernel features are missing which, depending on your process tree, may cause dump or restore failure. $ echo $? 1 $ sudo criu check --feature list mnt_id aio_remap timerfd tun userns fdinfo_lock seccomp_suspend \ seccomp_filters loginuid cgroupns $ sudo criu check --feature mnt_id Warn (cr-check.c:283): fdinfo doesn't contain the mnt_id field $ echo $? 1 $ sudo criu check --feature tun tun is supported $ echo $? 0 Signed-off-by:
Saied Kazemi <saied@google.com> Signed-off-by:
-
Andrey Vagin authored
Fixes #134 Signed-off-by:
-
Andrew Vagin authored
Signed-off-by:
-
Andrei Vagin authored
From code coverage report, we found that inotify_irmap doesn't test irmap cache, because we is always able to resolve path from /proc/PID/fd/X. Current view: top level - criu - irmap.c (source / functions) Hit Total Coverage Test: criu.info Lines: 40 223 17.9 % Date: 2016-03-16 Functions: 4 13 30.8 % This series introduces a new fault to emulate a situation when a file can't be opened by handle and we have to find it in the irmap cache/ It's required to test irmap cache. I don't know how to force it without this patch. Each time when a file can be opened by handle, its path can be resolved via /proc/PID/fd/X. Signed-off-by:
-
Sergey Bronnikov authored
changed per request from Andrey Vagin Signed-off-by:
-
Andrew Vagin authored
The bug was fixed in libnl-3 3.2.24, but rhel7 and the Trusty ubuntu don't update this packet yet commit b50a36bf34e7452377ab9bbb4d1873b68c65bf72 Author: Samuel Gauthier <samuel.gauthier@6wind.com> Date: Fri Nov 29 09:28:44 2013 +0100 The commit 6a8d90f5fec4 "attr: Allow attribute type 0" intended to allow the parsing of {netlink,packet,unix}_diag, even if they are using type 0 for valid attributes. It lacked this part in nla_parse. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:Samuel Gauthier <samuel.gauthier@6wind.com> Signed-off-by:
Thomas Graf <tgraf@suug.ch> Fixes #137 Signed-off-by:
-
Sergey Bronnikov authored
Usually we run CRIU tests automatically using Jenkins CI and it reports status as PASS/FAIL for overall testsuite on used environment. You should dig into log files to figure out how many tests were failed and skipped. This patch brings support of cute reports in TAP (Test Anything Protocol) format. The sample of report: TAP version 13 1..242 ok 1 - conntracks # SKIP manual run only ok 2 - busyloop00 ok 3 - sleeping00 ok 4 - pid00 ok 5 - caps00 ok 6 - wait00 NOTE: report will be generated only when options --keep-going and --report are specified. Signed-off-by:
-
