travis-ci: success for series starting with [1/3] zdtm: call test_init() before doing anything
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

test_init() has to be executed first, because it prepares a container.

travis-ci: success for series starting with [1/3] zdtm: call test_init() before doing anything
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

travis-ci: success for Fetch mmap_minimal_address and drop MAP_ANON
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

We assume that mmap_minimal_address with non-default
setting is not widespread but it's not true. Instead
lets fetch this setting runtime.

travis-ci: success for Fetch mmap_minimal_address and drop MAP_ANON
Signed-off-by: Cyrill Gorcunov <gorcunov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

This one covers the following cases:
* socket is bound to an interface
* socket isn't bound to an interface

https://github.com/xemul/criu/issues/73
travis-ci: success for series starting with [1/2] socket: Add support for SOCK_PACKET sockets
Signed-off-by: Gleb Valin <the7winds@yandex.ru>
Signed-off-by: Eugene Batalov <eabatalov89@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

If socket type is SOCK_PACKET it restores binding with proper address structure.

https://github.com/xemul/criu/issues/73
travis-ci: success for series starting with [1/2] socket: Add support for SOCK_PACKET sockets
Signed-off-by: Gleb Valin <the7winds@yandex.ru>
Signed-off-by: Eugene Batalov <eabatalov89@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Test seem to assume that zdtm lib directory is on PATH, but if it's not
- calling for parseargs.sh would fail (if cwd is static). Therefore,
this patch changes this to ../lib/parseargs.sh which should be fine both
for zdtm and vzt-cpt.

travis-ci: success for test: fix shell script tests (conntracks & route_rules)
Signed-off-by: Vitaly Ostrosablin <vostrosablin@virtuozzo.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Compiling zdtm on the latest Fedora rawhide gives errors like this:

ns.c: In function ‘prepare_mntns’:
ns.c:122:13: error: In the GNU C Library, "makedev" is defined
 by <sys/sysmacros.h>. For historical compatibility, it is
 currently defined by <sys/types.h> as well, but we plan to
 remove this soon. To use "makedev", include <sys/sysmacros.h>
 directly. If you did not intend to use a system-defined macro
 "makedev", you should undefine it after including <sys/types.h>. [-Werror]
   if (mknod("/dev/ptmx", 0666 | S_IFCHR, makedev(5, 2)) == 0) {
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

This commit fixes those errors.

travis-ci: success for zdtm: fix '"makedev" is defined by <sys/sysmacros.h>'
Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

When going daemon criu services ask cr_daemon() to keep
some descriptors open and the routine dup2-s them. The
problem is that the original descriptor is left where it
was and is leaked.

travis-ci: success for util: Do not leak dup-ed file descriptor
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

The idea of this test is to check non-root shared mounts
which lives in a few shared groups.

v2: fix the link description.

travis-ci: success for test: check non-root shared mounts (rev2)
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Most of the rest code uses int nr, so ...
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>

The PagemapEntry and struct iovec are quite interchangeable.
PagemapEntry can be used directly in the few places that converted it to
struct iovec.
The only place that used iovec2pagemap can be switched to open-coded
assignments without really hurting code readability.

travis-ci: success for pagemap: minor cleanups (rev2)
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

travis-ci: success for pagemap: minor cleanups (rev2)
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

CID 172196, issues/233.

The advance method can keep pr->pe NULL while the rest of
the code doesn't count on that.
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>

Now it's obsoleted by the advance method.
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>

We have pr->pe with the same data available widely, no need
to copy this thing twice.
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>

The only external users of ->seek_page method are page-xfer and uffd and
both of them are anyway interested in the entire pagemap rather than a
particular page.
The added 'skip_zero' parameter allows proper detection of zero pagemaps by
uffd.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

The return value of seep_pagemap_page can be either 1 (page found) or 0 (no
page found). There's no point in checking its return value for -1.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

travis-ci: success for uffd: A new set of improvements
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Since commit 95009c4c6d5 (criu: pagemap: introduce advance() helper for
pagemap iteration) seek_pagemap_page traverses the entire pagemap, rather
than starts each time from the last pagemap that was used.
With large pagemaps (like, e.g. in maps05 case) the new behavior causes
exponential increase in amount of calls to skip_pagemap_page for every new
snapshot.
Let's restore the original behavior.

Fixes: #217
Reported-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

travis-ci: success for series starting with [01/21] build: install libnet-dev
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

By default, sockets03 doesn't set SIGPIPE handler to SIG_IGN. When run
by zdtm.py, it doesn't cause problem, because it inherits signal
handler. However, when run via vzt-cpt (which uses system() to launch
tests), it receives default handler (which would terminate test). As
result, test is guaranteed to fail, because it will attempt to write to
shutdown receiver and get SIGPIPE in the face.

travis-ci: success for test: Fix sockets03 default SIGPIPE handler not being set to IGN (rev2)
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Vitaly Ostrosablin <vostrosablin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

A hook to cleanup test temporary files

travis-ci: success for zdtm: Add binfmt_misc.hook
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

For easier debugging.

v2: Forward scripts messages to criu log using cr_system

travis-ci: success for scripts: Print error value in case of action script fail (rev2)
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Check that SO_PEERCRED socket options restored correctly.
Now it's not supported, thus test is marked as "noauto".

(It seems support of this feature will require "ghost tasks",
when we introduce them).

travis-ci: success for zdtm: Add sock_peercred test
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Now we remove a link_remap file when all its files are restored.
It is wrong, because something else may fail and we will not be
able to repeat an attempt to restore processes again.

travis-ci: success for files: remove link_remaps when everything has been restored
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

link-remap files has to be deleted only if processes have been
restored successfully. Otherwise we can want to repeat an attempt,
but it is imposible if some link-remap files were deleted.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Starting with 4.8 the kernel doesn't allow to create inodes
with a uid or gid unknown to an user namespace where a file
system was mounted.
036d523641c66 ("vfs: Don't create inodes with a uid or gid unknown to the vfs")
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

DESTDIR is mostly used by packagers (such as from rpm spec
or deb rules), or just to try installation, and normally
should be left unset/empty.

Setting it to / looks weird to me. Besides, by leaving it empty
we are making sure everything works if DESTDIR is not set.

Fix INSTALL.md accordingly.

travis-ci: success for Makefile.install: DESTDIR should be empty
CC: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Now it is impossible to find when a test has been started,
but sometimes we want to knwo which tests were running in a specified moment.

travis-ci: success for zdtm.py: add a test name into a progress line
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Each test has a process which controls other processes and
if it dies the other processes have to be killed.

travis-ci: success for zdtm: exit a test if the "root" process died
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

CID 173074 (#1 of 1): Resource leak (RESOURCE_LEAK)
9. leaked_handle: Handle variable sock going out of scope leaks the handle.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

Just a little optimization (one syscall less).

travis-ci: success for Rectify 32-bit compatible C/R on x86
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

There's no such field in resp, only cr_errno

travis-ci: success for py: Fix resp.errno access
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>

No functional changes; this just improves uniformity.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

This will be used instead of currently existing per-fd
transport sockets, which are used on receive_fd stage.

v2: Create the socket before CR_STATE_FORKING state.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

INCLUDEDIR gonna be used in compel.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>