note: leave it __maybe_unused yet
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

It was droped during one of rebases.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

We should continue even if kdat feature isn't supported:

[criu]# ./criu/criu dump -t `pidof pypy` --shell-job
Warn  (criu/kerndat.c:804): Can't load /run/criu.kdat
Warn  (criu/libnetlink.c:55): ERROR -95 reported by netlink
Error (criu/net.c:3042): Unable to create a veth pair: -95
Warn  (criu/net.c:3064): NSID isn't reported for network links

Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>

The origin idea was to set --empty net for criu dump and criu restore,
but before cde33dcb ("empty-ns: Don't C/R iptables too (v2)"),
criu restore worked without --empty net and we didn't notice that
docker doesn't set this option on restore.

After a small brainstorm, we decided that it is better to remove
this requirement. Docker has to set this option, but with this changes,
the docker issue will be less urgent.

https://github.com/checkpoint-restore/criu/issues/393Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

There's a

   if (bad_thing) {
	   ret = -1;
	   break;
   }

code above this hunk, whose intention is to propagate -1 back to
caller. This propagation is obviously broken.
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

runc restore executes criu with --emptyns network and set
a setup-namespaces script to restore a network namespace.

https://github.com/xemul/criu/issues/314

Looks-good-to: Pavel Emelyanov <xemul@virtuozzo.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Fixes: 2189b9c71d3d ("net: allow to dump and restore more than one network namespace")
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Picked from patch "[PATCH RFC] namespaces: use CLONE_VFORK
with CLONE_VM when it is possible" by Andrew Vagin.

Currenly parent touches child's stack, as in moment of clone() call
its stack pointer is above the child's (we allocate char stack[128]
on parent's stack). This prevents to create CLONE_VM|CLONE_VFORK
processes, because the child uses stack addresses occupied by parent.

The patch changes clone_noasan() behaviour and allows to do that
with the same memory consumption. We give a child memory, which
is not used by parent clone(), so parent's and child's stacks
have no tntersection.

This allows to create CLONE_VM|CLONE_VFORK processes.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

(Was "user_ns: Block SIGCHLD during namespaces generation")

We don't want asynchronous signal handler during creation
of namespaces (for example, in create_user_ns_hierarhy())
as we do wait() synchronous. So we need to block the signal.
Do this once globally.

v2: Set initial ret = 0
v3: Block signal globally in root_item before its children
are created.
v4: Move block to prepare_namespace()
Suggested-by: Andrew Vagin <avagin@virtuozzo.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

The action is run in a very lightweight process.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

In next patches usernsd will need to create transport
socket in the same net_ns as other tasks do their
TRANSPORT_FD_OFF sockets.

Choose criu net_ns for that: this allows usernsd
to do not wait for creation of other net_ns, i.e.
to do not introduce new dependencies between tasks.

In case of (root_ns_mask & CLONE_NEWUSER) != 0
root_item's user_ns does not allow to restore criu net_ns,
so do prepare_net_namespaces() in sub-process to do not
lose criu net.

v3: Introduce __prepare_net_namespaces and execute it in cloned task.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Since net ns is assigned after prepare_fds() and,
in common case, at the moment of open_ns_fd() call
task points to a net ns, which differs to its target
net ns, we can't get the ns from a task. So, get it
from fdstore. Also, support userns ns fds.

v2: Add comment
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

We shave a test case for external veth devices. This test case
checks veth devices which are living in two dumped network
namespaces.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

A network device, which is connected to a bridge, is restored
after the bridge. In this case we can set the master attribute and
the device will be connected to the bridge automatically.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

We will need to enumirate links a few times
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

It's a preparation for enumirating links a few times.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

When we dump a veth device, the kernel reports where a peer device lives
and we use this information to restore this veth pair.

On restore we set a net ns id for a peer and it is created in the required
netns.

v2: add more comments
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

It will be used to restore links in different net namesapces.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

In each network namespace we can set an id for another network namespace
to be able to address it in netlink messages.

For example, we can say that a peer of a veth devices has to be created
in a network namespace with a specified id. If we request information about
a veth device, a kernel will report where a peer device lives.

An user are able to set this ID-s, so we have to dump and restore them.

v2: add more commetns
v3: make a union of nsfd_id and ns_fd, they are not used together
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

It will be used to dump netns id-s too.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

It will be used to get or set netns id-s.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

This function was added into libnl3 recently,
but we have to support old versions of this library.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Each network namespaces has a list of ID-s for other namespaces,
so if we request infomation about a veth device, we get an id
for a namespace of a peer device.

These ID-s can be set by users or by kernel when they are required.
CRIU has to restore these ID-s for network namespaces. We have to
remember that one netns can have different id-s in different network
namespaces.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

It is possible to assign id for network namespaces and
this id will be used by the kernel in some netlink messages.
If no id is assigned when the kernel needs it, it will be
automatically assigned by the kernel.

For example, this id is reported for peer veth devices.

v2: add a comment
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Merge code with the same functionality in one
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Nobody uses it.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

This tests create a few processes which live in three network namespaces
and have a few sockets which are created in different network namespaces.
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Each sockets belongs to one network namespace and operates
in this network namespace.

socket_diag reports informations about sockets from
one network namespace, but it doesn't report sockets which
are not bound or connected to somewhere. So we need to have
a way to get network namespaces for such sockets.
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

This ioctl is called for a socket and returns a file descriptor
for network namespace where a socket has been created.
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Each socket has to be restored from a proper network namespaces
where it was created.

We set a specified network namespace before restoring a socket.
A task network namespace is set after restoring all files.

v2: don't set the root netns for transport sockets
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

We need this to avoid conflicts with file descriptors,
which has to be restored.

Currently open_proc_pid() doesn't used during restoring
file descriptors, but we are going to use it to restore
sockets in proper network namespaces.
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Restore all network namespaces from the root task and then set
a proper namespace for each task after restoring sockets, because
we need to switch network namespaces to restore sockets.

Each socket has to be created in a proper network namespace.

v2: fix a typo bug
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Each socket has to be restored in a proper namespaces where
it has been created.

Here is an issue about unconnected and unbound sockets,
they are not reported via socket-diag and we can't to
get their network namespaces.

v2: add a comment before get_socket_ns()
    remove nsid from sk_packet_entry
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>

Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

PID ussualy means processs ID, but prepare_net_ns works with namespaces.

travis-ci: success for Dump and restore nested network namespaces (rev4)
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

ns_id will be used to collect sockets and other per-netns
resources

travis-ci: success for Dump and restore nested network namespaces (rev4)
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

There are a number of global variables around this descriptor
(e.g. open_proc_fd) and their values are saved in memory which
are not shared between processes.

travis-ci: success for Dump and restore nested network namespaces (rev4)
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

This time we shifted the update one month, due to the amount of
changes not being very big. And got pretty big update, including
a set of bugfixes and new functionality.
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>

It has two arguments "pos_l and "pos_h" instead of one "off". It is used
to handle 64-bit offsets on 32-bit kernels.

SYSCALL_DEFINE5(preadv, unsigned long, fd, const struct iovec __user *, vec,
                unsigned long, vlen, unsigned long, pos_l, unsigned long, pos_h)

https://github.com/checkpoint-restore/criu/issues/424Signed-off-by: Andrei Vagin <avagin@openvz.org>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>