- 30 Oct, 2014 1 commit
-
-
Cyrill Gorcunov authored
We will need devtmpfs as well so make it general. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Pavel Emelyanov <xemul@parallels.com>
-
- 29 Oct, 2014 5 commits
-
-
Andrey Vagin authored
Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
-
Andrey Vagin authored
Currenlty a generated path contains two slashes successively. Signed-off-by:
-
Andrey Vagin authored
So we need to create a temporary private mount for the old root. Signed-off-by:
-
Andrey Vagin authored
We do the same action twice. It's typo. Signed-off-by:
-
Andrey Vagin authored
This reverts commit 21d1b2fd. pivot_root() can move the current root to a non-shared mount. So we are going to create a temporary private mount in put_old. Signed-off-by:
-
- 27 Oct, 2014 13 commits
-
-
Ruslan Kuprieiev authored
We have two global enums with the member TUN. The first one is in fdinfo.proto and the second one is in netdev.proto. protoc complains about having TUN in 2 global enums because of the enum rules for C++(even though we're compiling .proto files for python). So lets rename TUN into TUNF to avoid that conflict. Signed-off-by:
Ruslan Kuprieiev <kupruser@gmail.com> Signed-off-by:
-
Cyrill Gorcunov authored
We simply check that major/minor didn't changed after restore. Signed-off-by:
-
Cyrill Gorcunov authored
/dev/console is a system console which provided by the system with major 5 and minor 1. It's usually configured on system startup with console= option and underlied driver is resposible to deliver messages to the console user. Signed-off-by:
-
Andrey Vagin authored
The parasite daemon set up SIGCHLD handler, but for dumping threads we use parasite-trap. While doing this the sigchild handler notices the CHLD arriving on the thread trap, emits an error (00.020292) Error (parasite-syscall.c:387): si_code=4 si_pid=3485 si_status=5 but wait() reports -1 (task is not dead, just trapped) and handler just exits. Let's stop a parasite daemon before dumping threads. Signed-off-by:
-
Andrey Vagin authored
Signed-off-by:
-
Andrey Vagin authored
Currently we fill as much as posible data in a socket and then use half of these data to make a flow in the connection. These data is send and recv buffers. When a connection is dumped and restored, it needs time to go back to the normal work. In this time we can reliably fill only send buffers. So at the result the sockets may contain less data than required for heartbeating and the test will block. The test with this patch will monitor actuall size of data in a test socket. Cc: Konstantin Neumoin <kneumoin@parallels.com> Reported-by:
Konstantin Neumoin <kneumoin@parallels.com> Signed-off-by:
-
Cyrill Gorcunov authored
@action_names is rather a const array, so make sure we never access some data outside of it defining its size. Signed-off-by:
-
Andrey Vagin authored
In addition it checks that criu closes all its descriptors Signed-off-by:
-
Cyrill Gorcunov authored
strstr is a really heavy one, lets use already defined and filled @file_path variable instead. Reported-by:
Andrew Vagin <avagin@parallels.com> Signed-off-by:
-
Cyrill Gorcunov authored
In criu we carry SysV memory via @VMA_AREA_SYSVIPC attribute but to the test must have a live reference to real memory area to check that shmem address was restored correctly. Add it. Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
Cyrill Gorcunov authored
This would allow to restore parameters with user namespaces enabled. Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
-
- 23 Oct, 2014 21 commits
-
-
Cyrill Gorcunov authored
Need to compare the /pts/ part in the former path, otherwise it will produce bogus /dev/pts/pts/index form. Signed-off-by:
-
Pavel Emelyanov authored
We need this only once -- while calling the mmap from remote context -- so it's enough to have on-stack variable. Signed-off-by:
-
Cyrill Gorcunov authored
Because directories are opened via direct mkdir call with name taken from ghost path don't postfix it with cr.%x.ghost, otherwise that's the name directory will have after restore complete causing cwd01 test to fail. Signed-off-by:
-
Andrey Vagin authored
Users don't like errors even if criu returns zero. So I suggest to start looking at them. Signed-off-by:
-
Andrey Vagin authored
In this case we have another chance to not skip errors. Signed-off-by:
-
Cyrill Gorcunov authored
We don't support posix mqueues at the moment but in case if this fs is simply mounted and not used lets proceed without errors. In case if someone is using it we detect it because fs won't be empty and refuse to dump. Signed-off-by:
-
Konstantin Neumoin authored
This timeout is too small for tcp test cases. This timeout should be bigger than TCP_RTO_MAX 120 seconds Signed-off-by:
-
Andrey Vagin authored
v2: typo fix Signed-off-by:
-
Andrey Vagin authored
It's bad idea to have only one target object. In addition I add a shared region to the second process, which is not mapped in the first. Signed-off-by:
-
Andrey Vagin authored
/proc/PID/map_files are protected by the global CAP_SYS_ADMIN, so we need to avoid using them to support user namespaces. We are going to use memfd_create() to get the first file descriptor and then all others processes will able to open it via /proc/PID/fd/X. In this patch memfd_create() is used to get a file descriptor, which is associated with a shared memory region. If memfd_create() isn't supported, the old scheme will be used. v2: don't set a name for memfd. It isn't required. Signed-off-by:
-
Andrey Vagin authored
/proc/PID/map_files are protected by the global CAP_SYS_ADMIN, so we need to avoid using them to support user namespaces. We are going to use memfd_create() to get the first file descriptor and then all others processes will able to open it via /proc/PID/fd/X. This patch reworks slave processes to not use map_files. v2: add more comments Signed-off-by:
-
Andrey Vagin authored
v2: Follow the kerndat style that "features" are described just by global boolean variables. v3: give NULL as a name to get EFAULT if memfd_create is supported Signed-off-by:
-
Cyrill Gorcunov authored
Currently we're using predefined format for master/slave pty peers: masters are always /dev/ptmx, while slaves are /dev/pts/$index, where $index is the peer number. While fitting most of distros this is not always correct and slave peers might be mounted to an arbitrary place, so that we need to somehow carry paths with ourself in image. Instead of bloating current tty image lets use regular file engine instead and on checkpoint stage save a path to the link in regfiles set, then on restore simply fetch it from the image. Such approach will help in future when we need to support multiple instances of devpts filesystem. To support backward compatibility with images where no regfile records are present we generate new one on the fly in pty_alloc_reg() helper. Because of the need to restore dead slave peers and restore of the controlling terminal we need to generate that named "fake inverted" pty_alloc_fake_reg() helper: in particular if we need to open dead slave peer we generate fake master peer, open it and the close out. Almost the same situation in restoring contolling terminal -- we get master peer, generate appropriate fake slave object, open it, manipulate, then close it out and free. Signed-off-by:
Tycho Andersen <tycho.andersen@canonical.com> Signed-off-by:
-
Cyrill Gorcunov authored
The idea is to be able to lookup for special id which might be not present and we should not yield the error. Signed-off-by:
-
Cyrill Gorcunov authored
We will use reg-files engine for tty c/r so lets prepare scaffolds here preventing the engine to generate ghost files for PTY peers (mostly because one can't create slave peers without opening master peers first which is a sole part of tty engine itself). Signed-off-by:
-
Cyrill Gorcunov authored
Otherwise this postfix will be accumulated on subsequent checkpoints. Signed-off-by:
-
Cyrill Gorcunov authored
We will need it for tty restore. Signed-off-by:
-
Cyrill Gorcunov authored
To use it in tty code even when file descriptor is not added into files chain. Signed-off-by:
-
Cyrill Gorcunov authored
We will use this path in reg-files engine anyway so simply switch to this ability now. Signed-off-by:
-
Cyrill Gorcunov authored
We will have to support more tty types in future so make calls depending on type of ttys. Signed-off-by:
-
Cyrill Gorcunov authored
Instead of calling case() with majors all over the places lets introduce own enum for tty types and use it instead. Because we're using not @major numbers now but taking @minors into account as well, this brings more strict check of which kind of terminals we can dump now thus it's potentially should fix the cases when we're trying to c/r terminals which we don't understand yet (in particular /dev/console [5:1]). Signed-off-by:
-
